GCAN-IO-8300 Profinet IO耦合器 GCAN-IO-8300 Profinet IO coupler

1.功能简介 
1. Function Introduction 

1.1功能概述 
1.1 Function Overview 

GCAN-IO-8300 Profinet总线耦合器是我公司推出的基于Profinet总线自主研发的高性能总线通用远程IO模块，为用户节约成本，简化配线，提高系统可靠性，这些IO端子模块可以通过模块化的方式进行扩展。一个完整的节点由一个总线耦合器、1-32个任意数量的端子模块以及一个终端端子模块组成。采用GCAN-IO-8300 Profinet总线耦合器，通过GC-bus扩展技术，可极为方便地建立I/O连接，最多可连接32个输入/输出端子模块。此系列IO特别适用于现场点数多，信号种类多集中控制。 
The GCAN-IO-8300 Profinet bus coupler is a high-performance bus universal remote IO module independently developed by our company based on the Profinet bus. It saves costs, simplifies wiring, and improves system reliability for users. These IO terminal modules can be expanded in a modular manner. A complete node consists of a bus coupler, 1-32 terminal modules of any number, and one terminal module. By using the GCAN-IO-8300 Profinet bus coupler and GC bus expansion technology, I/O connections can be easily established, up to 32 input/output terminal modules can be connected. This series of IO is particularly suitable for centralized control with multiple on-site points and signal types. 

采用GCAN-IO-8300 Profinet总线耦合器可作为西门子200SMART、1200、1500、300等系列PLC的Profinet从站使用。 
The GCAN-IO-8300 Profinet bus coupler can be used as a Profinet slave for Siemens 200SMART, 1200, 1500, 300 and other series PLCs. 

GCAN-IO-8300总线耦合器可连接所有的总线端子模块。就用户而言，模拟量输入/输出信号的处理方式与其它种类信号的处理方式没有任何区别。控制器过程映像区内的信息以字节阵列格式显示。GCAN-IO-8300总线耦合器支持自动组态，您无需在PC上设置参数。 
The GCAN-IO-8300 bus coupler can connect all bus terminal modules. As far as users are concerned, the processing method of analog input/output signals is no different from that of other types of signals. The information within the controller process image area is displayed in byte array format. The GCAN-IO-8300 bus coupler supports automatic configuration, so you don't need to set parameters on your PC. 

1.2性能特点 
1.2 Performance Characteristics 

●2个Profinet总线接口（RJ45）； 
● 2 Profinet bus interfaces (RJ45); 
●总线传输速率：100Mbps； 
●Bus transmission rate: 100Mbps; 
●总线传输距离（站与站间距）：100m； 
●Bus transmission distance (distance between stations): 100m; 
●总线端子模块数量最多为32个； 
●The maximum number of bus terminal modules is 32; 
●组态方式为自动组态形式； 
●The configuration mode is in the form of automatic configuration; 
●电源采用24V DC（-15%/+20%）； 
●The power supply adopts 24V DC (-15%/+20%); 
●电流消耗约360mA； 
●The current consumption is about 360mA; 
●为后续IO供电最大电流约740mA； 
●The maximum current for subsequent IO power supply is about 740mA; 
●电气隔离为1500 Vrms； 
●Electrical isolation is 1500 Vrms; 
●工作温度范围：-40℃~+85℃； 
●Working temperature range: -40 ℃~+85 ℃; 
●尺寸：长100mm*宽69mm*高48mm。 
●Size: Length 100mm * Width 69mm * Height 48mm. 

1.3典型应用 
1.3 Typical Applications 

●与分布式总线端子模块相连接，构成一个完整的控制节点； 
●Connect with the distributed bus terminal module to form a complete control node; 
●执行数据采集并以Profinet协议进行数据传输。 
●Perform data collection and transmit data using Profinet protocol.

GCAN-IO-8300设备使用手册链接
GCAN-IO-8300 Equipment User Manual Link

www.gcgd.net/filedownload/2977887

如果您需要具体了解设备或者询价，可以加我微信或在线对话框联络。
If you need specific information about the equipment or inquire about the price,you can add me on WeChat or contact me through the online chat.