GCAN-GT-8321S Profinet网关 GCAN-GT-8321S Profinet Gateway

1.功能简介 
1. Function Introduction 

1.1功能概述 
1.1 Function Overview 

GCAN-GT-8321S网关是我公司推出的基于Profinet总线自主研发的高性能Profinet从站/可编程智能网关。设备可作为西门子200SMART、1200、1500、300等系列PLC的Profinet从站网关使用。 
The GCAN-GT-8321S gateway is a high-performance Profinet slave/programmable intelligent gateway independently developed by our company based on the Profinet bus. The device can be used as a Profinet slave gateway for Siemens 200SMART, 1200, 1500, 300 and other series PLCs. 

（1）GCAN-GT-8321S-XXX可作为上述西门子PLC的网关，通过“通用站描述文件（GSD）”，实现西门子PLC与CAN自由口/CANopen主/从站、ModbusTCP从站/Modbus RTU主/从站通讯。 
(1) GCAN-GT-8321S-XXX can serve as a gateway for the above-mentioned Siemens PLC, enabling communication between Siemens PLC and CAN free port/CANopen master/slave, Modbus TCP slave/Modbus RTU master/slave through the "General Station Description Document (GSD)". 

注意： 
Note: 

对应子型号只能实现西门子Profinet与对应的一种总线协议进行转换，协议不同，价格不同。 
The corresponding sub model can only convert Siemens Profinet to one corresponding bus protocol, and the price varies depending on the protocol. 

（2）GCAN-GT-8321S-PROG作为可编程智能网关，硬件接口包含Profinet、CAN、RS485、以太网；支持CANopen、Modbus TCP/RTU主/从等通信协议，可通过自由编程，实现不同总线之间数据的互相转换。 
(2) GCAN-GT-8321S-PROG serves as a programmable intelligent gateway, with hardware interfaces including Profinet, CAN, RS485, and Ethernet; Supports communication protocols such as CANopen, Modbus TCP/RTU master/slave, etc., and can achieve data conversion between different buses through free programming. 

1.2性能特点 
1.2 Performance Characteristics 

●2个Profinet总线接口（RJ45），支持从站级联； 
● 2 Profinet bus interfaces (RJ45), supporting cascading from slave stations; 
●Profinet总线传输速率：100Mbps； 
●Profinet bus transmission rate: 100Mbps; 
●Profinet总线传输距离（站与站间距）：100m（CAT5线缆）； 
●Profinet bus transmission distance (station to station distance): 100m (CAT5 cable); 
●电源采用24V DC（-15%/+20%）； 
●The power supply adopts 24V DC (-15%/+20%); 
●电气隔离为1500 VDC； 
●Electrical isolation is 1500 VDC; 
●工作温度范围：-40℃~+85℃； 
●Working temperature range: -40 ℃~+85 ℃; 
●相对湿度：10%~95%，无凝露； 
●Relative humidity: 10%~95%, no condensation; 
●EMC：Zone B，IEC61131-2； 
●EMC：Zone B，IEC61131-2； 
●IP等级：IP20 
●IP rating: IP20 

1.3典型应用 
1.3 Typical Applications 

●与分布式总线端子模块相连接，构成一个完整的控制节点； 
●Connect with the distributed bus terminal module to form a complete control node; 
●执行数据采集并以Profinet协议进行数据传输。 
●Perform data collection and transmit data using Profinet protocol.

GCAN-GT-8321S设备使用手册链接
GCAN-GT-8321S Equipment User Manual Link

www.gcgd.net/filedownload/2977908

如果您需要具体了解设备或者询价，可以加我微信或在线对话框联络。
If you need specific information about the equipment or inquire about the price,you can add me on WeChat or contact me through the online chat.